BIOS & FIRMWARE
- Driver & Tools
- BIOS & FIRMWARE
1. Add new uCode to support new processor.
2. Fixed 3Dmark03 can not run under VISTA.
1. Enable support for Prescott 800FSB 3.0GHz CPU
2. Enhance SATA competibility for JMB363 controller
3. Enable C1E support for Conroe-L A-1 stepping CPU
Fine tune USB2.0 driving
1. Fix fail to resume from S1/S4 on some systems
2. Fixed show "error loading operation system" when using CHS mode PATA HDD and set "Access Mode" to CHS.
3. Enable Multi-Streaming support
4. Enhance VGA compatibility
5. Change CopyRight year from 2006 to 2007.
6. Fix fail to run VISTA with some PCIE VGA cards
1. Added New Micro Code to support new CPU.
2. Add "Press TAB to display BIOS POST Message" string when full screen logo is enabled in BIOS.
3. Enhance compatibility with some PCI/PCIE LAN cards
4. Fixed CPU FSB frequency display error
5. Fixed USB controller not assign SVID/SDID.
1. Fixed PCI LAN device may get re-detected when system power on or resume from S3 mode
2. Update JMicron Option ROM to ver.1.06.64
3. Adjust S3 resume algorithm
4. Fine tune CPU temperature detection algorithm
5. Enable support for TM1 and TM2 on Conroe and ConroeL CPU processor
6. Fixed system will not light up when set ESATA_PCIE Item to PCI-ex1 while MATROX PCI-ex1 VGA card has been installed on PCIEx1 slot.
7. Fixed system will not be able to resume from S3 with some PCIE Graphic card
8. Fixed after change CPU FSB to 134Mhz/267Mhz in BIOS, both DMI and POST screen still show 133Mhz,266Mhz
9. Readjust Q'fan control algorithm
10.Fix CPU ratio will be defaulted to minimum value when first installed ConroeL CPU onto this motherboard
11.Reduce time taken to resume form S3
12.Fixed fail to display when installing PCI-ex4 or PCI-ex8card at PCI-ex16 slot, and using PCI VGA card for display
13.Fixed system will hang after resuming from S3.
14.Reduce time taken to flash BIOS using EZFlash2
15.Added New Micro Code to support new CPUs
16. Fixed that ACPI/APM S5 WOL still works when PS2 KB/MS set disable
1. Enhance overclocking capability.
2. Modify CPU Fan Speed Waring value from 800RPM to 600RPM if Conroe CPU is used.
3. Enhance memory compatibility
4. Support SMBIOS v2.4
5. Enable support for SATA CD-ROM under EZFlash
6. Fixed PCI slot APIC routing error cause PCI device work abnormal
7. Fixed if BIOS power up by PS/S mouse set "double click", moving mouse or single-click mouse still can wake up system from S5
8. Support HDD Freeze Lock function.
9. Support AAM feature
Enable support for Kingmax 1GB module
Initial Release