BIOS & FIRMWARE
- Driver & Tools
- BIOS & FIRMWARE
Fix RAID HDD size issue
*Note: Update Intel(R) Rapid Storage Technology Driver to v10.5.0.1026 to support full HDD capacity. (The downloaded file has contained the driver.)
1. Improve memory compatibility
2. Improve system stability
3. Update CPU Level up function
4. Update Marvell Option ROM
5. Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
Fix BIOS setup item "Intel(R) SpeedStep(TM) Tech" can't set to "Enable" if BCLK over than 149
Fix some ODD may not be detected by Marvell controller
1. Improve memory compatibility
2. Improve system stability
1.Fix system might hang when using Clarkdale i5 655 CPU and DIMM with 1600Mhz default SPD.
2.Fix BIOS setup might show incorrect Target DRAM Frequency when using DIMM with 1600Mhz default SPD.
1. Improve memory compatibility
2. Improve system stability
3. Fix 2.2T HDD size is wrong if Quick Boot option is disabled
4. Improve compatibility with some USB3.0 devices
5. Support new CPUs. Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
1. Improve memory compatibility
2. Improve system stability
3. Update CPU Level Up function
4. Show CPU/DRAM frequency in Bios setup screen
5. Fix system will stay at POST screen too long when iPod 80GB is connected
6. Fix DEL and F8 keys doesn't work with Microsoft Reclusa Keyboard
7. Fix tRRD option can't be set to values lower than 4
8. Revise items of option "J-Micron SATA/PATA Controller" to Enable/Disable
1.Fix system may halt in POST after AC power loss during BIOS update.
2.Fix some PCIEx1 LAN card can't be detected at PCH PCIEx1 slot.
Support new CPUs.
Please refer to our website at: http://support.asus.com/cpusupport/cpusupport.aspx?SLanguage=en-us
1. Fix CPU Level UP may set Vcore too high if OV_CPU Jumper is enabled
2. Fix S3 may fail if NEC USB30 and Mavell 9127 options are set to disabled
3. Fix some CPU's L1/L2 size may not shown correctly
First release Bios