[Desktop Chassis] ROG Strix Helios Case FIO Module Replacement

Note

  • Please put the case on a flat table to prevent the side panel from falling during disassembly and assembly. 
  • Please handle with care when disassembling and assembling the glass side panel to avoid collision/drop/heavy pressure.

 

Preparation

  • Phillips screwdriver PH2

 

1.Remove the glass panels on both sides.

 

2.  Remove the two screws covered by the PSU cover, then turn to 90 degrees, pick up PSU cover.

 

3. Remove the wire connected to the motherboard.

 

4. Remove Velcro strap and cable tie.

 

5. Remove the black signal line.


6. Remove LED cable.

 

7. Lift the handle and remove the top cover, then remove the two screws.

 

8. Press the front side Latch, Remove and replace the FIO module.