[IP camera] Can I specify sensing zones using motion sensors besides the PIR sensor? | Official Support

ASUS Support FAQ

FAQ

Product ZenEye

[IP camera] Can I specify sensing zones using motion sensors besides the PIR sensor?

Your ZenEye Cam uses a PIR (Passive Infrared Sensor) as its motion detector to sense heat based motion. Your ZenEye Cam will be triggered by infrared radiation changes, when a heat emitting object, such as a human, vehicle or animal passes by.

The PIR motion sensor can be used to allow a camera to preserve its battery power.

You can set "Video Motion Detection" to specify which zones you care about.
1. Open the ASUS ZenEye app and go to "Camera Settings".
2. On the settings page, you can tap "Video Motion Detection" to customize your detection zones.
3. Tap "Add Detection Zone".
4. Define your "Zone Name".
5. Define your "Detection Zone" using the draggable rectangle.

For more product information, please refer to https://www.asus.com/Networking-IoT-Servers/Smart-Home/All-series/ASUS-ZenEye/

Was this information helpful?

Yes No

North America Contact Support

If you need more help, see our solutions to get support.

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ