[Desktop Chassis] ROG Strix Helios right/ left Plastic feet disassembly and assembly precautions
Notice
1. Please, wear gloves to protect your hands before disassembling and assembling, and pay attention to the corners of the parts to avoid scratches.
2. When the side panel is made of glass, please handle it with care when disassembling the side panel of the case to avoid collision/fall/stress.
3. When disassembling, please lay the casing flat on a flat surface to prevent the side panel from falling during disassembly and assembly.
4. Please, tidy up the relevant wires during assembly to avoid damaging the wires during the assembly process.
Tools required
Phillips screwdriver PH2
1. Remove the glass panels on both sides.
2. Open the cable cover and lift up to remove.
3. Remove Power cover
3-1 Remove 2 screws on the left side.
3-2 Remove the 3 screws on the right side.
4. Remove the 4 base screws on the left side.
5. Remove the 4 base screws on the right side.
6. Remove the 4 screws on the bottom of the chassis.
7. When removing the left and right bases, squeeze the front and rear latches on the bases.
left side
right side
8. Removal of left and right-side Plastic feet completed.