[PureGo Fruit and Vegetable Cleanliness Detector] Getting Started PureGo

What is PureGo

     PureGo is an assistant to detect the degree of fruit and vegetable cleaning, not like a laboratory-specialized pesticide testing instrument, so it is a general home user.

 

PureGo notice

  1. Ensure to wait until your PureGo is fully charged before using it for the first time. Your PureGo is fully charged when the LED ring lights up green(About 2 to 3 hours).
  2. Ensure to follow the calibration tutorial and calibrate when using your PureGo for the first time.

For calibration steps, please refer to this https://www.asus.com/us/support/FAQ/1043798

 

Start set up PureGo

  Detecting with the PureGo when washing fruits or vegetables, recommended washing steps

  1. Clean the surface of the leafy parts and dirt from the roots of the fruits and vegetables using clean water or with a tool.
  2. Soak the fruits and vegetables in clean water for approximately 1 minute to allow agricultural pesticide or other residue such as dust to dissolve in the water. PureGo's revolutionary smart water detection feature makes it so that no buttons have to be pressed during the detection process; PureGo will automatically begin detection once it is placed in the water.
  3. Continue washing the fruits and vegetables with a small trickle of water to wash away agricultural pesticide or other residue on the surface of the fruits and vegetables, while continuing the detection process with the PureGo.
  4. The degree of washing is shown by the LED light, and the green light indicates the best wash. If the green light flashing has not been reached, it is recommended to repeat the steps of 2 to 4.
  5. Remove the inedible parts of your fruits and vegetables.

 

 

For more information, please refer to this https://www.asus.com/us/Networking-IoT-Servers/Smart-Home/All-series/PureGo-PD100/

For frequently asked questions, please refer to this https://www.asus.com/us/support/FAQ/1043803