[PureGo Fruit and Vegetable Cleanliness Detector] Calibrating your PureGo

How to calibrate your PureGo:

  1. Press and hold the Start/Standby button for approximately 1.5 seconds until the LED ring lights up blue, then place your PureGo into clean water. The LED ring will blink blue during calibration. When the calibration process is completed, the LED ring becomes a solid blue light. The calibration process should take about 25 seconds.
  2. Use your smart phone to calibrate: The first time you use PureGo, follow the smart phone APP calibration tutorial to calibrate.

 

When do I need to calibrate PureGo?

  1. Calibrate when using your PureGo for the first time.
  2. When changing the place of PureGo use, it is recommended to recalibrate.
  3. We recommend calibrating your PureGo periodically (once every 1 to 3 months, depending on usage frequency) to ensure detection accuracy. Or refer to the calibration time shown by PureGo APP.

 

For more information, please refer to this https://www.asus.com/us/Networking-IoT-Servers/Smart-Home/All-series/PureGo-PD100/

For frequently asked questions, please refer to this https://www.asus.com/us/support/FAQ/1043803