[Desktop Chassis] ProArt PA401 case fan (front/rear) disassembly and assembly instructions
Notice
1. Kindly wear gloves to protect your hands before proceeding with disassembly or assembly. Pay special attention to the corners of the parts to avoid any scratches.
2. When the side panel is made of glass, please handle it with extreme care during disassembly to avoid any collisions, falls, or undue stress. 3. When disassembling, please lay the casing flat on a stable surface to prevent the side panel from falling during the process.
4. Kindly ensure that the relevant wires are neatly arranged during assembly to prevent any damage to the wires throughout the process.
5. Keep track of all screws and small components during disassembly and assembly to avoid losing any parts.
Preparation
Phillips screwdriver PH2
Compatibility
Preinstall fans information please refer to specification page of product.
A. Front & Top
B. Top & rear
1. Open the both side panel and remove them.
2. Remove fan connectors from fan hub.
3. Release cable ties.
4. Replace Fan.
A. Front
(1) Remove the front panel.
(2) Remove 4 screws on each fan, then replace the fan with a new one.
B. Rear
Remove 4 screws, then replace the fan with a new one.
