[Desktop Chassis] ProArt PA401Chassis Front Panel and Logo Disassembly and Assembly precautions
Notice
1. Kindly wear gloves to protect your hands before proceeding with disassembly or assembly. Pay special attention to the corners of the parts to avoid any scratches.
2. When the side panel is made of glass, please handle it with extreme care during disassembly to avoid any collisions, falls, or undue stress.
3. When disassembling, please lay the casing flat on a stable surface to prevent the side panel from falling during the process.
4. Kindly ensure that the relevant wires are neatly arranged during assembly to prevent any damage to the wires throughout the process.
5. Keep track of all screws and small components during disassembly and assembly to avoid losing any parts.
Front Panel : Apply outward pressure from the groove at the bottom of the front panel to remove it.
Note:
Since this panel is made of natural materials, to ensure its aesthetics and durability, we recommend avoiding direct contact with water during cleaning.
Please refer to the following cleaning suggestions:
1. Use a vacuum cleaner with a brush attachment to gently remove dust.
2. Use an electrostatic brush or a dusting brush to lightly brush away surface dust.
Logo: Apply gentle inward pressure to both sides of the logo clips to detach it.
Visit ASUS official website to learn more about ProArt Cases.