[NUC] Error Code 28 in Device Manager on NUCs | Official Support

ASUS Support FAQ

FAQ

[NUC] Error Code 28 in Device Manager on NUCs

Resolution

According to Error codes in Device Manager in Windows, Error Code 28 refers to a missing driver for the piece of hardware that the error appears on in Device Manager.

To resolve this error, install the latest driver for the device showing the error. Choose one of the following options to download the correct driver:

Option 1 (Recommended): Install and run the Driver & Support Assistant (DSA).
- This utility will automatically install drivers for devices it identifies.

Option 2: Manually download drivers from Download Center by searching for your specific system model (ex. NUC12WS).

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ