[NUC] Unable to get 7.1 channel audio output on NUC Kit NUC7PJYH | Official Support

ASUS Support FAQ

FAQ

[NUC] Unable to get 7.1 channel audio output on NUC Kit NUC7PJYH

Resolution

To fix this issue, follow below steps:

Connect the audio amplifier to rear audio port on the NUC.
- This is because the front 3.5 mm jack only supports stereo output.

Install latest audio driver for the NUC7JPYH.
If using third party application to setup the 7.1 channel audio output, there's a setting in the application that needs to be changed in order for bit streaming to work. In this case, do the following:
- In Settings, go to Play Settings > Video, Audio, Subtitles > More Settings.
- In Audio Settings, set Output mode to Non-decoded high-definition audio to extend.

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ