[NUC] System Memory for NUC 8 Home NUC8i5BEHFA and NUC8i3BEHFA | Official Support

ASUS Support FAQ

FAQ

Product NUC 8 Home

[NUC] System Memory for NUC 8 Home NUC8i5BEHFA and NUC8i3BEHFA

The NUC 8 Home NUC8i5BEHFA and NUC8i3BEHFA is pre-installed with 4 GB 2400 MHz SDRAM SO-DIMM (1.2V). You can upgrade the memory with modules that meet these requirements.

Memory Requirements:

Supports two 1.2V DDR4 SO-DIMMs
2400 MHz
Unbuffered, non-ECC
Single-sided or double-sided
Maximum memory: 32 GB
Serial presence detect (SPD)

See the technical product specification for your NUC for complete system memory details and requirements.
See the user guide for your NUC to upgrade or add memory.

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ