[ROG Accessory] ROG Omni Receiver FAQ

ASUS Support FAQ

FAQ

Product ROG HARPE ACE AIM LAB EDITION, ROG Strix Scope II 96 Wireless

The ROG Omni Receiver allows wireless connection to one compatible keyboard and one compatible mouse at the same time with a single USB receiver and free up other USB ports on your PC — without compromising performance.

Applicable models:

Keyboard: Scope II 96 Wireless, Azoth, Falchion RX LP

Mouse: Harpe Ace, Keris II Ace, Impact III Wireless

How to Pair your device through ROG Omni Receiver (Please update your Armoury Crate to the latest version)

1. Can I pair three devices to a single Omni Receiver?

An ROG Omni Receiver can pair with a maximum of one compatible keyboard and one compatible mouse. The pairing buttons in the “Add Pairing Device” section will be disabled if one keyboard and one mouse have already been paired.

2. What if I would like to switch to another Omni Receiver?
Please understand that you will have to disconnect the original receiver and re-pair your Strix Scope II 96 once you move on to a different Omni Receiver. You cannot use two Omni Receivers at the same time.

For example, when connecting your Omni Receiver (A) to PC (A), you cannot use the Omni Receiver (B) on the PC (B) at the same time.

3. How can I use ROG Omni Receiver with my Harpe Ace (Black Edition)?

If you cannot see the Omni Receiver page after connecting your ROG Harpe Ace (black edition) receiver, you will need to go through manual FW update.

For the latest technology, we highly recommend that you update your ROG Harpe Ace Aim Lab Edition to the latest FW version through: firmware

How to Update the Firmware of ROG Harpe Ace Aim Lab Edition for ROG Omni Receiver Compatibility?

1. Download the Firmware: Start by downloading the appropriate firmware for the ROG Harpe Ace Aim Lab Edition.

2. Unzip the Firmware File: Once downloaded, locate the file named ‘FirmwareAutoUpdate_1.0.0.6' and unzip or extract its contents.

3. Initiate the Firmware Update: Double-click on the extracted firmware update executable file.

Please be aware of the following:

Ensure that the ROG Harpe Ace Aim Lab Edition is connected to your system during the update process.
Your keyboard and mouse can only be paired with a single Omni Receiver at a time. If you wish to connect them to another Omni Receiver, re-pairing both devices via Armoury Crate will be necessary.

4. What items need to be provided when sending in for repair?

Please provide the mouse and keyboard itself and the dongle attached to the product when sending it in for repair

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ

FAQ

[ROG Accessory] ROG Omni Receiver FAQ

[ROG Accessory] ROG Omni Receiver FAQ

1. Can I pair three devices to a single Omni Receiver?

An ROG Omni Receiver can pair with a maximum of one compatible keyboard and one compatible mouse. The pairing buttons in the “Add Pairing Device” section will be disabled if one keyboard and one mouse have already been paired.

2. What if I would like to switch to another Omni Receiver? Please understand that you will have to disconnect the original receiver and re-pair your Strix Scope II 96 once you move on to a different Omni Receiver. You cannot use two Omni Receivers at the same time.

For example, when connecting your Omni Receiver (A) to PC (A), you cannot use the Omni Receiver (B) on the PC (B) at the same time.

3. How can I use ROG Omni Receiver with my Harpe Ace (Black Edition)?

If you cannot see the Omni Receiver page after connecting your ROG Harpe Ace (black edition) receiver, you will need to go through manual FW update.

For the latest technology, we highly recommend that you update your ROG Harpe Ace Aim Lab Edition to the latest FW version through: firmware

4. What items need to be provided when sending in for repair?

Please provide the mouse and keyboard itself and the dongle attached to the product when sending it in for repair

Was this information helpful?

2. What if I would like to switch to another Omni Receiver?
Please understand that you will have to disconnect the original receiver and re-pair your Strix Scope II 96 once you move on to a different Omni Receiver. You cannot use two Omni Receivers at the same time.