[TUF Gaming GT502 PLUS] How to connect TF120 fan controller to GT502 case? | Official Support

ASUS Support FAQ

FAQ

Product TUF Gaming GT502, TUF Gaming GT502 PLUS

[TUF Gaming GT502 PLUS] How to connect TF120 fan controller to GT502 case?

TUF Gaming GT502 PLUS is equipped with an ARGB hub.

If you want to replace attached ARGB hub with TUF Gaming TF120 ARGB Fan Controller, please follow below steps.

For more product information, please refer to product website:

Step 1. Disconnect the RGB button from GT502 ARGB board.

Step 2. Prepare ARGB controller adapter cable from GT502 accessory box.

Step 3. Connect the RGB button with ARGB controller adapter cable.

Step 4. Connect the 2-pin header of ARGB controller adapter cable to TF120 controller and finish.

Now you can enjoy unique lighting effects of TF120 on TUF Gaming GT502.

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ