When my PC is boot up, the screen shows error message about “Chassis intruded”. How do we solve it? | Official Support

ASUS Support FAQ

FAQ

When my PC is boot up, the screen shows error message about “Chassis intruded”. How do we solve it?

Please check the MB has a jumper and the jumper name is CHASIS. This function is design for “Case Open” Detect function. This function need use external detect device. Ex: Case open scanner or switch.

The default setting is use MB jumper to short Chassis & GND pins. The default function is closed.

If you would like use this function, please remove this jumper and let Chassis Signal and GND pins open.

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ