[Desktop Chassis] ProArt PA401 Feet Disassembly and Assembly Instructions
Notice
1. Kindly wear gloves to protect your hands before proceeding with disassembly or assembly. Pay special attention to the corners of the parts to avoid any scratches.
2. When the side panel is made of glass, please handle it with extreme care during disassembly to avoid any collisions, falls, or undue stress.
3. When disassembling, please lay the casing flat on a stable surface to prevent the side panel from falling during the process.
4. Kindly ensure that the relevant wires are neatly arranged during assembly to prevent any damage to the wires throughout the process.
5. Keep track of all screws and small components during disassembly and assembly to avoid losing any parts.
Preparation
Phillips screwdriver PH2
Step1. Gently detach the foot pads from the feet at the bottom.
Note: The front and rear feet are of different shapes. Ensure to verify their shapes before proceeding with installation.
Step2. Remove the screw located in the circular hole of each foot stand.
Step3. Removal of feet completed.
Visit ASUS official website to learn more about ProArt Cases.