[Desktop Chassis] TUF Gaming GT302 ARGB case cable clip disassembly and assembly instructions

Notice
1. Please, wear gloves to protect your hands before disassembling and assembling, and pay attention to the corners of the parts to avoid scratches.
2. When the side panel is made of glass, please handle it with care when disassembling the side panel of the case to avoid collision/fall/stress.
3. When disassembling, please lay the casing flat on a flat surface to prevent the side panel from falling during disassembly and assembly.
4. Please, tidy up the relevant wires during assembly to avoid damaging the wires during the assembly process.

 

Preparation
Phillips screwdriver PH2

 

Cable management space


Step1. Pull outward and upward to remove the right side panels from the rear groove.

 

Step2. Replace the cable clip.
A. Iron cable clip
(1) Release the hook-and-loop fastener, and then loosen the screw on the iron cable clip.

(2) Removal of the iron cable clip completed.

B. Plastic cable clip
(1) Loosen the screw on the plastic cable clip.

(2) Removal of the plastic cable clip completed.

 


Visit ASUS official website to learn more about TUF Gaming GT302 ARGB https://www.asus.com/motherboards-components/cases/tuf-gaming/tuf-gaming-gt302-argb/