[NUC] How to Recover NUC BIOS, using the Aptio® V UEFI Core, when Using the Power Button Menu | Official Support

ASUS Support FAQ

FAQ

[NUC] How to Recover NUC BIOS, using the Aptio® V UEFI Core, when Using the Power Button Menu

Resolution

In the unlikely event that a BIOS update is interrupted, it's possible the BIOS may be left in an unusable state. Please follow the instructions and/or watch the video below to try and recover the BIOS.

Download the Recovery BIOS (.bio) file. Example:

Available downloads

Copy the recovery file (*.bio) to a USB device.
Plug the device into a USB port of the target computer when it's turned off.
Press and hold the power button down for three seconds, then release it. The Power Button menu appears.

Power Button menu

Press F4 to start the BIOS recovery.
Wait 2–5 minutes for the recovery process to complete.

Flash update has completed successfully

The computer will either turn off when the recovery process is complete, or it will prompt you to turn it off.

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ