[NUC] Updating NUC BIOS with Visual BIOS Using the F7 Menu | Official Support

ASUS Support FAQ

FAQ

[NUC] Updating NUC BIOS with Visual BIOS Using the F7 Menu

Resolution

Note

The latest BIOS update files for NUC products are available on Download Center.

The F7 BIOS update option allows you to update the system BIOS during the boot process and before the operating system loads.

Download and save the Recovery BIOS (.BIO) file to a USB device. Ensure that the USB device's file format is .FAT32. Example:
Plug the USB device into a USB port of the target computer.
Start the NUC.
During boot, when the F7 prompt is displayed, press F7 to enter the BIOS Flash Update tool.
Select the USB device and press Enter
Select the .bio file and press Enter
Confirm you want to update the BIOS by pressing Enter.
Wait 2–5 minutes for the update to complete.
When the BIOS update is complete, the computer will boot back into Windows.

After any BIOS update, ASUS recommends the following steps:

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ