[NUC] How to Disable Fast Boot on NUCs | Official Support

ASUS Support FAQ

FAQ

[NUC] How to Disable Fast Boot on NUCs

Resolution

Disable Fast Boot from the power button menu. Access the power button menu with this sequence:

Make sure the system is off, and not in Hibernate or Sleep mode.
Press the power button and hold it down for three seconds and release it. The power button menu should display.
Tip: If the system boots to the OS after trying this procedure then you didn't hold the button quite long enough. If the system simply remains off after trying this procedure, then you held the button too long (longer than 4 seconds).
Press F3 to disable Fast Boot.

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ