[NUC] NUC Not Powering On | Official Support

ASUS Support FAQ

FAQ

[NUC] NUC Not Powering On

Resolution

Try the following Steps:

Optional Step:

Clearing CMOS via CMOS battery disconnection, follow steps below:

Disconnect all peripherals, devices and power cords from the NUC
Remove the bottom chassis cover.
Remove the board from the chassis to access the battery on the processor side of the board, if needed.
Disconnect the Onboard Battery Connector of the CMOS. (Refer to CMOS Battery on the NUC)
Wait for 2-3 minutes.
Connect the Onboard Battery Connector of the CMOS.
Reinstall the board in the chassis.
Replace the chassis cover.
Reconnect all peripherals, devices and the power adapter.
Press the power button.

If in need of further assistance, contact ASUS Customer Support.

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ