[NUC] NUC Doesn't Boot with Two Memory Modules Installed | Official Support

ASUS Support FAQ

FAQ

[NUC] NUC Doesn't Boot with Two Memory Modules Installed

What are you seeing?

Your NUC won't start if two memory modules are installed.

Why are you seeing it?

When you purchase two memory modules separately, the DRAM chips and SPD timing on the memory can be different. This is true even if they're made by the same vendor and have the same part number.

These differences can cause the computer not to start or instability with both modules installed.

How to fix it.

Try using only one memory module at a time on your NUC. Make sure that both are functioning.
We highly recommend that you purchase memory as a matched pair.

Related topic

Troubleshooting Memory Issues on NUC

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ