[NUC] NUC Shows a Black Screen After a BIOS Update | Official Support

ASUS Support FAQ

FAQ

[NUC] NUC Shows a Black Screen After a BIOS Update

Resolution

How to potentially fix a failed BIOS update on an NUC Product:

Download the latest BIOS recovery file for your NUC on Download Center.
See the Technical Product Specifications for NUC Products for details about where the security jumper is located.
Follow the steps for BIOS Recovery by Security Jumper:
- BIOS Update and Recovery Instructions for NUCs with the Aptio® V UEFI Firmware Core
- BIOS Update and Recovery Instructions for NUC with Visual BIOS
After any BIOS update, Asus recommends the following steps
1. Press F2 during start up to enter BIOS Setup.
2. Press F9 to set BIOS default values.
3. Customize any BIOS settings, if desired (optional).
4. Press F10 to save and exit BIOS Setup.

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ