[NUC] NUC: Custom Control Mode Fan Regulation Is Not Working As Expected When Using the Processor As the Primary Sensor | Official Support

Q: [NUC] NUC: Custom Control Mode Fan Regulation Is Not Working As Expected When Using the Processor As the Primary Sensor

Resolution This is a known issue. Set the Primary sensor to "PCH" for regulation. The NUC will still Power Limit Throttling, but will not do Thermal Throttling and will not shutdown due to thermal issues.

ASUS Support FAQ

FAQ

[NUC] NUC: Custom Control Mode Fan Regulation Is Not Working As Expected When Using the Processor As the Primary Sensor

Resolution

This is a known issue.

Set the Primary sensor to "PCH" for regulation. The NUC will still Power Limit Throttling, but will not do Thermal Throttling and will not shutdown due to thermal issues.

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ