[NUC] Get Started with NUC 8 Enthusiast NUC8i7HVKVAW

Here's a checklist for you to get started using your NUC 8 Enthusiast- NUC8i7HVKVAW.

  • Follow the User Guide to begin using your NUC.
  • See how to set up Windows® 10 the first time you start the NUC.​
  • Learn how to install language packs and alternative keyboards.
  • Learn some useful Windows® 10 tips.
  • If you want to upgrade the pre-installed memory, check the  Product Compatibility Tool for supported memory modules.
  • Find compatible tested peripherals (for example, adapters, TVs, and hubs).
  • Download and install the latest BIOS version. Learn how to update BIOS.
  • Install the latest device drivers from Download Center for.
    • Chipset
    • Graphics
    • Radeon™ RX Vega M Graphics
    • Management Engine
    • Wireless and/or Gigabit Ethernet (depending on how you connect)
    • USB Type C Power Delivery
    • Thunderbolt™ 3—required if you use Thunderbolt devices
    • Card Reader—required if you use an SD card for extra storage
    • Bluetooth®—required if you use Bluetooth devices
    • Consumer Infrared (CIR)—required if you use an infrared remote control
    • Audio—required if you use the 3.5mm audio jack or Optical
    • Serial IO—required if you use the I2C, UART, or GPIO host controllers
    • Software Guard Extensions ( SGX)
    • Rapid Storage Technology—required if you configure RAID