[Desktop Chassis] ASUS A21 Case FIO Module Replacement | Official Support

ASUS Support FAQ

FAQ

Product A21

[Desktop Chassis] ASUS A21 Case FIO Module Replacement

Note

Please put the case on a flat table to prevent the side panel from falling during disassembly and assembly.
Please handle with care when disassembling and assembling the glass side panel to avoid collision/drop/heavy pressure.

Preparation

Tool: Phillips screwdriver PH2

1. Unscrew the 2 side screws and remove the 2 side panels.

2. Remove Front Panel.

3. Remove front panel frame.

4. loosen two screws on the FIO Module and take out the FIO Module.

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ