[Desktop Chassis] ROG Strix Helios Case FIO Module Replacement
Notice
1. Kindly wear gloves to protect your hands before proceeding with disassembly or assembly. Pay special attention to the corners of the parts to avoid any scratches.
2. When the side panel or front panel is made of glass, please handle it with extreme care during disassembly to avoid any collisions, falls, or undue stress.
3. When disassembling, please lay the casing flat on a stable surface to prevent the side panel from falling during the process.
4. Kindly ensure that the relevant wires are neatly arranged during assembly to prevent any damage to the wires throughout the process.
5. Keep track of all screws and small components during disassembly and assembly to avoid losing any parts.
Preparation
- Phillips screwdriver PH2
1.Remove the glass panels on both sides.
2. Remove the two screws covered by the PSU cover, then turn to 90 degrees, pick up PSU cover.
3. Remove the wire connected to the motherboard.
4. Remove Velcro strap and cable tie.
5. Remove the black signal line.
6. Remove LED cable.
7. Lift the handle and remove the top cover, then remove the two screws.
8. Press the front side Latch, Remove and replace the FIO module.
