[LCD Monitor] No display or black screen on monitor connected to computer/motherboard when entering the BIOS | Official Support

ASUS Support FAQ

FAQ

Product PG32UQ, VG28UQL1A, XG43UQ

[LCD Monitor] No display or black screen on monitor connected to computer/motherboard when entering the BIOS

Note: When CSM function in BIOS of your motherboard/PC is disabled, BIOS would boot in UEFI mode. However,, but if the graphics card installed on the motherboard is not compatible with UEFI mode, there may be no display or black screen. Please update the firmware.

Model : PG32UQ、VG28UQL1A、XG43UQ

Download Center | Official Support | ROG Global (asus.com)

Here we take PG32UQ as example.

1. Enter the model name.

2. Click Driver & Utility.

3.Click BIOS & FIRMWARE.

4.Click DOWNLOAD.

Download the [Firmware] file and you can find operation steps about updating firmware.

Reminder: Please update with newer version of firmware.

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ