[Phone] How do I mount my ROG Phone II onto the TwinView Dock II? | Official Support

ASUS Support FAQ

FAQ

Product ROG Phone II (ZS660KL)

[Phone] How do I mount my ROG Phone II onto the TwinView Dock II?

1. Open the lid of the TwinView Dock II.

2. Use your ROG Phone II to push the spring retaining wall to the back and slide your phone onto the deck.

3. Align and insert the phone's side-mount port with the port on the dock.

4. Fasten the latch on the back of the hinge to activate the second screen and ensure the phone is secured.

*You cannot use the TwinView Dock II while the latch is unlocked.

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ