[Lyra]How to judge the current status of Lyra from the LED color?
Please refer to the table below for detailed definitions of LED colors :
Status |
Bluetooth |
LED Color |
Flashing |
|
General |
Booting up |
breathing with various colors |
N |
|
Boot up complete (Bluetooth not connected with app) |
ON |
White |
N |
|
Boot up complete(Bluetooth connected with app) |
ON |
White |
Y |
|
Reset start (press Reset button for 5 sec., wait for Orange blinking then release) |
Orange |
Y |
||
Rescue mode |
Purple |
N |
||
Credential info (SSID/password/admin username and password)synchronizing with other Lyra |
Green |
Y |
||
Primary Lyra only |
(the Lyra connecting to modem) |
|
||
Primary: Boot up complete and can connect to Internet |
Light Cyan |
N |
||
Primary: Boot up complete and Internet failed |
Orange |
N |
||
2nd Lyra only (After Lyra is added in the network) |
(the Lyra connecting to the Primary node) |
|
||
Boot up complete (but connection lost to primary Lyra) |
Red |
N |
||
Boot up complete and connected to the Lyra network |
Light Cyan |
N |
||
After setting up with app, when applying settings, it will try to connect to the Lyra network |
breathing with various colors |
N |
||
Ethernet backhaul (When using wired connection to connect previous Lyra device) |
|
Green |
N |
Pairing |
Behavior |
LED |
Lyra in the network |
Pairing Triggers |
Blink in Green |
Pairing connection failed |
Back to previous status |
|
Pairing connected successfully |
Back to previous status |
|
Lyra wishes to be added to the network |
Pairing Triggers |
Blink in Green |
Pairing connection failed |
Back to previous status |
|
Pairing connected successfully |
Breathing with various colors (synchronizing settings) |