What to do if lens of my projector is dirty? | Official Support

ASUS Support FAQ

FAQ

What to do if lens of my projector is dirty?

Gently wipe the lens by using lens cleaning cloth. Do not touch the lens with your hands and fingers.

Note :
1) Switch off the power then unplug the power cable of LED projector from the power outlet before cleaning it.
2) Ensure that the lens cools down before cleaning it.
3) Do not use liquid or aerosol cleaners, benzene, or thinners on your LED projector.
4) Never operate this LED projector immediately after moving it from a cold location.
When the LED projector is exposed to a drastic change in temperature, moisture may condense on the lens and its other internal parts.
To prevent this, use the unit for at least 2 hours in the circumstance with an extreme or sudden change in temperature occurs.

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ