[ Projector ] Projector is powered on but displays no image/ image freezes | Official Support

ASUS Support FAQ

FAQ

[ Projector ] Projector is powered on but displays no image/ image freezes

Please follow below steps to check:

1) Disconnect the power cord and connect it again.

2) Make sure the cables connected to device well.

If you connect multiple sources at the same time, use the “Source” button on the control panel to switch

3) Reset the device to default setting and try again. How to reset the unit to default setting
4) If the issue still exits after default setting, please contact your local technique support center or service center for help. https://www.asus.com/support/CallUs

Note:

1. If those projectors with powered battery can’t be turned off at all, please press power key about 5 sec and then device will be forced to shut down directly.

2. ASUS Projector will auto-shut down if it’s overheating. Please check the working environment so that we can help you more efficiently.

Was this information helpful?

Yes No

Contact Support

If you need more help, see our solutions to get support.

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.

ASUS Support FAQ