[Desktop Chassis] TUF Gaming GT302 ARGB case FIO module disassembly and assembly instructions | Zvanična Podrška

ASUS Podrška ČPP

FAQ

Proizvod TUF Gaming GT302

[Desktop Chassis] TUF Gaming GT302 ARGB case FIO module disassembly and assembly instructions

Notice
1. Please, wear gloves to protect your hands before disassembling and assembling, and pay attention to the corners of the parts to avoid scratches.
2. When the side panel is made of glass, please handle it with care when disassembling the side panel of the case to avoid collision/fall/stress.
3. When disassembling, please lay the casing flat on a flat surface to prevent the side panel from falling during disassembly and assembly.
4. Please, tidy up the relevant wires during assembly to avoid damaging the wires during the assembly process.

Preparation
Phillips screwdriver PH2

Step1. Open the front panel upwards from the bottom groove.

Step2. Loosen the screws on both sides of the FIO module.

Visit ASUS official website to learn more about TUF Gaming GT302 ARGB https://www.asus.com/motherboards-components/cases/tuf-gaming/tuf-gaming-gt302-argb/

Was this information helpful?

Yes No

Obratite se podršci

Ako gornje informacije ne mogu da reše vaš problem, javite nam se

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.

ASUS Podrška ČPP

O kraja do vrha