[AIOT] How do you support RS422 and RS485 in PE200U? | Zvanična Podrška

ASUS Podrška ČPP

FAQ

Proizvod PE200U

[AIOT] How do you support RS422 and RS485 in PE200U?

PE-200U's COM1 and COM2 support RS485 and RS422 Protocol, but you should set them first from the BIOS, the default setting is RS232.

1. Please go to BIOS menu then go to Serial port 1 or Port 2.

2. Please select RS485

3. Select the Save Changes and Reset from Save & Exit menu

Yes No

Obratite se podršci

Ako gornje informacije ne mogu da reše vaš problem, javite nam se

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.

ASUS Podrška ČPP

O kraja do vrha