[NUC] USB Device Not Detected While Attempting BIOS Update during OS Installation on NUC | Official Support

Q: [NUC] USB Device Not Detected While Attempting BIOS Update during OS Installation on NUC

Resolution Format the USB drive as FAT32 file system, as USB on the NTFS format will not work. Verify that there is no other content available on the USB drive apart form the BIOS file. Download the BIOS file from the Download Center and perform the BIOS Update .

ASUS Support FAQ

FAQ

[NUC] USB Device Not Detected While Attempting BIOS Update during OS Installation on NUC

Resolution

Format the USB drive as FAT32 file system, as USB on the NTFS format will not work.
Verify that there is no other content available on the USB drive apart form the BIOS file.
Download the BIOS file from the Download Center and perform the BIOS Update.

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ