[Desktop Chassis] AP201 Case FIO Module Replacement | Official Support | ASUS Malaysia

ASUS Support FAQ

FAQ

Product PRIME AP201, PRIME AP201 TG

[Desktop Chassis] AP201 Case FIO Module Replacement

Note

Please put the case on a flat table to prevent the side panel from falling during disassembly and assembly.
Please handle with care when disassembling and assembling the glass side panel to avoid collision/drop/heavy pressure.

Preparation
Tool: Phillips screwdriver PH2

1.Remove 2 side panels.

2.Remove top dust cover and front panel.

3.loosen two screws on the FIO Module and take out the FIO Module.

Was this information helpful?

Yes No

Contact Support

If you need more help, see our solutions to get support.

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ

Back to Top