ProArt X670E-CREATOR WIFI
BIOS & FIRMWARE
- Driver & Tools
- BIOS & FIRMWARE
"Update AGESA version to Combo AM5 PI 1.1.7.0 patch A to support next generation AMD Ryzen™ processors.
Before running the USB BIOS Flashback tool, please rename the BIOS file ((PAX670CW.CAP) using BIOSRenamer."
Disable STAPM of AM5 Ryzen™ 8000 processors to improve system performance.
Before running the USB BIOS Flashback tool, please rename the BIOS file ((PAX670CW.CAP) using BIOSRenamer.
"1. Update AGESA version to Combo AM5 PI 1.1.0.2b
2. Improve system stability
Before running the USB BIOS Flashback tool, please rename the BIOS file ((PAX670CW.CAP) using BIOSRenamer."
"1.Update AGESA version to Combo AM5 PI 1.1.0.1
2.Improve system stability
3.This update includes the patch for the LogoFAIL vulnerabilities.
4.Support graphics card with M.2 storage
Before running the USB BIOS Flashback tool, please rename the BIOS file ((PAX670CW.CAP) using BIOSRenamer."
1.Update AGESA version to Combo AM5 PI 1.0.8.0 to support upcoming CPU
Before running the USB BIOS Flashback tool, please rename the BIOS file ((PAX670CW.CAP) using BIOSRenamer.
"1. Update AGESA version to Combo AM5 PI 1.0.0.7c
2. Improve system performance
Before running the USB BIOS Flashback tool, please rename the BIOS file ((PAX670CW.CAP) using BIOSRenamer."
"1. Update AGESA version to Combo AM5 PI 1.0.0.7b
2. Improve memory compatibility
Before running the USB BIOS Flashback tool, please rename the BIOS file ((PAX670CW.CAP) using BIOSRenamer."
"1. Improve system stability.
2. Improve device compatibility for PCIe Gen5 M.2 devices
Before running the USB BIOS Flashback tool, please rename the BIOS file (PAX670CW.CAP) using BIOSRenamer."
"1. Update AGESA version to Combo AM5 PI 1.0.0.7.a
2. Support 48/24GB high-density DDR5 memory module.
3. Memory QVL amended to account for AMD 1.3V SoC voltage limit.
4. EXPO/XMP prompt notice removed.
Before running the USB BIOS Flashback tool, please rename the BIOS file ((PAX670CW.CAP) using BIOSRenamer."
1.Update AGESA version to Combo AM5 PI 1.0.0.7.
2. Support 48/24GB high-density DDR5 memory module.
3. SoC voltage for Ryzen 7000 series limited to a maximum of 1.30V to protect the CPU and motherboard.
Before running the USB BIOS Flashback tool, please rename the BIOS file (PAX670CW.CA) using BIOSRenamer.
SoC voltage for Ryzen 7000 series limited to a maximum of 1.30V to protect the CPU and motherboard.
Before running the USB BIOS Flashback tool, please rename the BIOS file ((PAX670CW.CAP) using BIOSRenamer.
SoC voltage for Ryzen 7000X3D series limited to a maximum of 1.30V to protect the CPU and motherboard.
Before running the USB BIOS Flashback tool, please rename the BIOS file ((PAX670CW.CAP) using BIOSRenamer.
1.Update AGESA version to ComboAM5PI 1.0.0.6
2.TPM 2.0 security update
3.Recommended for optimum performance with AMD Ryzen™ 7000X3D series processors
4.Implement thermal monitoring mechanisms to help protect the CPU and motherboard. Also, the older BIOSes with manual Vcore control were removed
Before running the USB BIOS Flashback tool, please rename the BIOS file (PAX670CW.CAP) using BIOSRenamer.
1. Update AGESA version to ComboAM5PI 1.0.0.6
2. Supports high density DDR5 module
3. TPM 2.0 security update
Before running the USB BIOS Flashback tool, please rename the BIOS file (PAX670CW.CAP) using BIOSRenamer.
Step 1: Download the downgrade FW update tool
First, download the FW update tool specifically designed for Thunderbolt Downgrade NVM31.
Step 2.1: (For onboard TBT) Enable Thunderbolt function
Access the BIOS setup and ensure that the Advanced > Thunderbolt(TM) Configuration > Discrete Thunderbolt(TM) Support option is enabled.
Step 2.2: (For THUNDERBOLTEX_4 card) Enable Thunderbolt function
Make sure the THUNDERBOLTEX_4 card is connected to the motherboard.
Access the BIOS setup and ensure that the Advanced > Thunderbolt(TM) Configuration > Discrete Thunderbolt(TM) Support option is enabled.
Step 3: Run the FW update tool
1. Extract the XXX_TBT_FW_31_V1.4 file and copy Shell.efi to a USB drive.
2. Insert the USB drive into the motherboard.
3. Press the [Power key] and then hold [F2] to enter the BIOS setup menu.
4. If the BIOS setup is in [EZ mode], press [F7] to switch to [Advanced mode].
5. Select [Exit] and choose [Launch EFI Shell from USB drive] to enter the shell mode for the update process.
Step 4: Downgrade to TBT NVM31
Follow the instructions provided by the tool. Please note that the downgrade process may take some time, so be patient until it is completed.
Step 5: Check for compatibility issues
After the FW downgrade is completed, restart your system and reconnect your Thunderbolt devices. Keep in mind that downgrading to an older FW version may result in known compatibility issues.
Please be aware that downgrading FW carries certain risks and may cause other issues or limit functionality. Prior to proceeding with the downgrade, ensure that you understand and accept these risks.
Improved compatibility and added CDC mode support.