[Gaming NB] Military Standard (MIL-STD 810) - Introduction
What is the MIL-STD-810H standard?
Developed by the U.S. Department of Defense, the MIL-STD-810H standard is a U.S. military standard of testing that examines equipment's resistance to the environmental conditions it may face throughout its lifetime. This standard aims to simulate harsh environmental conditions in a controlled setting.With these tests, we ensure our products are durable, reliable, and offer better longevity. This benefits you as a user and the environment by making the product more sustainable.
How are ASUS TUF Laptops tested to the MIL-STD 810H standards?
ASUS TUF Gaming laptops undergo six tests to determine whether they meet MIL-STD 810H standards. * The test conditions include Shock, Vibration, High and Low Temperature, Humidity, and High Altitude. Please refer to the table below for the testing methods and procedures. The testing items and results may vary depending on the product.
Test Category | Test Method & Procedure | MIL-STD-810H Test Parameters |
High Temperature Test | Method 501.7-Procedure I (A1) | Duration: 7 day exposure (7 X 24 hr. cycles) |
Temperature: 33°C~71°C | ||
The unit is non-operational during the test. | ||
Method 501.7-Procedure II (A1) | Duration: 3 day exposure (3 X 24 hr. cycles) | |
Temperature: 32~49°C cycling temperature exposure | ||
Table 501.7-III-Procedure. High temperature cycles, climate category A1 Hot Dry | ||
The unit is operational during the test. | ||
Low Temperature Test | Method 502.7- Procedure I (C1) | Duration:7 day exposure (7 X 24 hr. cycles) |
Temperature: -25~ -33°C | ||
The unit is non-operational during the test. | ||
Method 502.7- Procedure II (C1) | Duration: 3 day exposure (3 X 24 hr. cycles) | |
Temperature: -21~ - 32°C | ||
Low temperature cycles,Table IX. Basic climatic_C1 | ||
The unit is operational during the test. | ||
Humidity Aggravated Cycle Test | Method 507.6- Procedure II | Duration:10 Days |
Temperature: 30°C and 60°C | ||
Humidity: 95% RH, constant | ||
The unit is operational during the test. | ||
Vibration Test | Method 514.8- Procedure I | Frequency 5-500Hz, Vertical rms = 1.08 g |
Transverse rms = 0.21g, Longitudinal rms = 0.76g | ||
Test Time: 60 minutes per axis | ||
Method 514.8- Procedure I | Frequency 5-500Hz, Vertical rms = 2.24 g | |
Transverse rms = 1.45g, Longitudinal rms = 1.32g | ||
Test Time: 40 minutes per axis | ||
Shock Test | Method 516.8- Procedure VI | Bench Handling |
(Drop Height : 100 mm) | ||
The unit is operational during the test. | ||
Altitude Test | Method 500.6-Procedure II | Test Pressure: 15,000ft |
Temperature: 5°C and 40°C, both for 12 hours | ||
The unit is operational during the test. |
*The testing regime includes the requirements of both military-grade standards and ASUS quality tests, and varies depending on the device. MIL-STD-810 testing is conducted on selected ASUS products only. Note that the MIL-STD-810 testing helps to ensure the quality of ASUS products but does not indicate a particular fitness for military use. The test is performed under laboratory conditions. Any damage caused by attempts to replicate these test conditions would be considered accidental, and would not be covered by the standard ASUS warranty. Additional coverage is available with ASUS Premium Care.