PRIME H570-PLUS

Intel® H570 (LGA 1200) ATX motherboard with dual M.2, 8 power stages, Intel® 1 Gb Ethernet, DisplayPort, HDMI, USB 3.2 Gen 2 Type-C®, rear USB 3.2 Gen 2, Thunderbolt™ 4 header support, PCIe 4.0, Aura Sync RGB lighting

Intel^® LGA 1200 socket: Ready for 11th Gen Intel^® Core™ processors
Comprehensive cooling: VRM heatsink, M.2 heatsink, PCH heatsink, hybrid fan headers and Fan Xpert 2+
ASUS OptiMem: Careful routing of traces and vias to preserve signal integrity for improved memory stability
Ultrafast connectivity: PCIe 4.0, Dual M.2, 1Gb Ethernet, rear USB 3.2 Gen 2 Type-C^® and Thunderbolt™ 4 support
5X Protection III: Multiple hardware safeguards for all-round protection.

Prime H570-PLUS
Tune It Your Way
Cool to the Core
Build on a Solid Foundation
Little Things Make a Big Difference

1 x PS/2 combo port
4 x USB 2.0
1 x HDMI
1x DisplayPort
1 x USB 3.2 Gen 2 Type-C^®
2 x USB 3.2 Gen 2 ports
1Gb Ethernet
3 x Audio Jacks
PCIe 4.0 / 3.0 x16
● ASUS SafeSlot Core+
M.2 slot only
(Key E, CNVi & PCIe)
PCIe 3.0 x16 (max. @x4)
● Intel^® Optane™ Memory Ready
Audio Features
  ● Premium Japanese audio capacitors
  ● Audio Shielding
  ● Dedicated audio PCB layers
8-pin connector
DDR4 4600 (OC) MHz
LGA 1200 Socket
● Intel^® 11^th Gen Core™ Processors & Intel^® 10^th Gen Processors
4 x USB 3.2 Gen 1
M.2 PCIe 4.0 x4 mode
Intel^® H570 Chipset
6 x SATA 6Gb/s
2 x addressable Gen 2 headers
2 x AURA RGB headers
M.2 PCIe 3.0 x4 mode
1 x Thunderbolt™ 4 header

ASUS Prime series motherboards are expertly engineered to unleash the full potential of 10th and 11th Generation Intel^® Core™ processors. Boasting a robust power design, comprehensive cooling solutions and intelligent tuning options, Prime H570-PLUS provides daily users and DIY PC builders a range of performance tuning options via intuitive software and firmware features.

Tune It Your Way

Comprehensive controls form the foundation of the ASUS Prime series. The Prime H570 motherboard packs flexible tools to tune every aspect of your system, enabling performance tweaks to perfectly match the way you work, to maximize productivity.

All-Around Energy Efficiency

The Energy Processing Unit (EPU) automatically optimizes power consumption and maximizes energy savings with Away mode — a smart setting that creates an extreme energy-saving scenario by shutting down unused I/O controllers.

Flexible cooling Controls

PRIME 500 Series motherboards offer comprehensive control over system fans, via the included Fan Expert 2+ software. Auto-Tuning mode intelligently configures all parameters with a single click

Precise Digital Power Control

The Digi+ voltage-regulator module (VRM) delivers real-time control over voltage droop, automatically switching frequency and power-efficiency settings. It also allows you to fine-tune your CPU for ultimate stability and performance.

Specifications vary by models

ASUS AI Overclocking

ASUS AI Overclocking is an intelligent utility that helps you get the most out of your build by automatically profiling your CPU and cooling system to predict optimal voltage and frequency settings.

Accessible via the AI Suite software in Windows or directly through the UEFI, the intuitive AI Overclocking user interface enables users of all levels. A range of customizable settings are available for seasoned overclockers, and an auto-tuning option is available for beginners.

AI Overclocking at a Glance

Designed by Experts

At the heart of AI Overclocking is a proprietary algorithm developed by ROG R&D engineers who worked with world-renowned overclockers to create a tool for users of all levels.

Predictive Edge

The algorithm analyzes your CPU and cooling system, and based on what it finds, predicts optimal settings. The software then uses these settings to automatically guide the clocking process, balancing frequency and voltage.

Real-time Adjustments

The software monitors workload, system temperature, fan speed and power draw every minute and it makes real-time adjustments to ensure ongoing optimal performance.

Load, save and reboot

Go to BIOS by pressing the Delete key during system boot-up.
Press F5 to load the UEFI defaults, then press F10 to save and reboot. Boot into operating system.

Run a stress test

A stress test assesses system performance in order to estimate system potential as well as voltage needs for overclocking. To run a test, choose from any of these benchmarks
Blender / Prime95 / Aida64/ ROG real Bench
Alternatively, you can run the test by using Intel^® Extreme Tuning Utility.

Apply AI OC

Return to BIOS.
Navigate to the AI Tweaker section and set CPU Core Ratio to AI Optimized.
Hit F10 to save and reboot.

Turn on your PC and put on a load on the processor to get a baseline reading of your CPU, cooling system capabilities.

AI Overclocking Guide

The AI Overclocking Guide provides detailed information and instructions about how to tune your system manually. It can be accessed by hitting the F11 hotkey.

Core Group Loading

For high-core count processors like the H570, AI Overclocking lists data according to core group. This gives you adaptive control based on the status of core groups (3 / 5 / 8 / all cores), and it provides target frequency and voltage estimations needed for manual tuning.

AI Overclocking in AI Suite

Onboard intelligence lets you automated overclocking with full, flexible control available via 5-Way Optimization within AI Suite (in Windows).

AI Cooling

ASUS AI Cooling function will automatically manage and control motherboard-connected fans to ensure optimal settings based on current system load and temperature.

Self-Adaptive Fan Tuning

CPU Temperature Detection

AI Cooling detects CPU temperatures and uses a proprietary algorithm to calculate the lowest fan speed required to effectively cool the system and keep fan noise down.

Automated Optimization

Under stable system loads, the software then automatically lowers fan* speed to the optimal setting, decreasing fan noise without compromising performance. *Fans need to be connected to the following headers for AI Cooling control: CPU_FAN / CPU_OPT / CHA_FAN / M.2_FAN / H_AMP / RAD_FAN

Ongoing Monitoring

AI Cooling continues to monitor the system and adjust fan speed based on current load.

One-click Activation

AI Cooling can easily be activated via the Fan Xpert 4 dashboard in ASUS AI Suite 3. Once activated, it will override all manual controls.

Fan Speed References

For those who prefer manual control, AI Cooling provides reference points on a graph that details fan speed in relation to temperature, providing a guide for fan settings.

UEFI BIOS

The renowned ASUS UEFI BIOS provides everything you need to configure, tweak and tune your system. It offers intelligently simplified options for PC DIY beginners, as well as comprehensive features for seasoned veterans.

Advanced Tuning for Serious Tweakers

An intuitive Advanced mode offered via the UEFI lets you take complete control. A built-in search feature makes it easy to find options, and various advanced functions let you intelligently make nuanced adjustments so you can dial in performance just the way you want.

Search Function
Quickly and easily find the option or setting you need.

ASUS User Profile
Port configuration settings between different BIOS versions or share them with friends.

Quick and Simple Setup

EZ mode displays vital settings and stats and also offers guided wizards, drag-and-drop functionality, and one-click application of important settings — all to help you get your rig up and running in no time.

Intuitive Graphical Fan Control
Fine-tune individual fan settings simply by dragging a curve with the mouse.

EZ XMP
Improve DRAM performance with one click.

Aura On/Off Mode (Stealth)
Easily enable or disable Aura RGB lighting or every onboard LED, for a subdued aesthetic touch.

Back to Tune It Your Way
↑

Cool to the Core

Prime H570 series is engineered with multiple onboard heatsinks and an array of hybrid fan headers to ensure your rig stays cool and stable under intense workloads.

M.2 Heatsink

An M.2 heatsink takes care of the two M.2 slots, warding off throttling that can occur with M.2 storage during sustained transfers. The heatsink is held in place by captive screws and can be moved to other M.2 slot.

Removable captive screws reduce risk of drops or loss during heatsink removal.

VRM Heatsinks and Thermal Pads

One massive VRM heatsink and thermal pads improve heat transfer from the MOSFETs and chokes for better cooling performance.

Stack Cool 3+

2-ounce copper layers draw heat away from critical components to keep them at their optimal operating temperatures.

Back to Cool to the Core
↑

Cooler by Design

Prime H570 series features comprehensive cooling controls that are configurable via Fan Xpert 2+ software or via the UEFI BIOS.

Multiple Temperature Sources
AIO Pump Header
Smart Protection
4-Pin PWM/DC Fan

Each header can dynamically reference three thermal sensors. Fan Xpert 2+ allows you to map the temperature of supported ASUS graphics cards to optimize cooling for GPU- and CPU-intensive tasks.
A dedicated PWM/DC header for self-contained water-cooling setups.
A dedicated integrated circuit protects each fan header from overheating and overcurrent.
Each onboard header supports auto-detection of PWM or DC fans.

Back to Cool to the Core
↑

Build on a Solid Foundation

Prime H570 series is built to handle the additional cores and increased bandwidth of 11th Generation Intel^® Core™ processors. ASUS H570 motherboards provide all the fundamentals to boost daily productivity, so your system will be ready for action with stable power, intuitive cooling and flexible transfer options.

ASUS OptiMem

Revisions to the motherboard's trace routing provide the latest Intel processors with unrestricted access to memory bandwidth. ASUS OptiMem technology carefully maps memory signal pathways across different PCB layers to reduce vias and adds shielding zones that significantly reduce crosstalk.

Top layer – ground ring to prevent lateral interference

ASUS OptiMem benefits:

Improved memory stability and compatibility
Allows lower memory latencies at equivalent voltages
Improved memory frequency margin

Motherboards with OptiMem technology were tested with Synopsys HSPICE simulation software

Back to Build on a Solid Foundation
↑

Dual M.2 slots
(up to 64 Gbps)

Prime H570-PLUS offers a total of two M.2 slots, with one slot supporting data-transfer speeds of up to 64 Gbps via PCI Express^® 4.0, enabling quicker boot-up and app load times with OS or application drives.

* Actual transmission speeds will be lower than the theoretical maximum speed.

** The M.2_1 supports PCIe 4.0, and the M.2_2 support PCIe 3.0.

Back to Build on a Solid Foundation
↑

PCIe^® 4.0 Slot

ASUS H570 motherboards are designed specifically for 11th Generation Intel^® Core™ CPUs and offer PCIe® 4.0 connectivity for the latest GPUs. The wide bandwidth and superfast transmission speeds allow you to create feature-rich builds that can handle high loads effortlessly.

Back to Get the Most out of All Your Cores
↑

USB 3.2 Gen 2
Type-C^®

Numerous USB ports support high-end rigs loaded with peripherals, including a rear-panel USB Type-C^® connector with fast USB 3.2 Gen 2 connectivity for compatible case.

Back to Build on a Solid Foundation
↑

Thunderbolt™ 4 header Support

Prime H570-PLUS features Thunderbolt™ 4 support via an on-board header. With the latest Intel-certified ASUS TunderboltEX 4 add-on card, it can enable bi-directional speeds of up to 40 Gbps on a single cable. Additionally, this card has a daisy-chain function for multi-screen connection and supports up to an 8K resolution display. It can also provide up to 100 watts of power to fast-charge devices.

Back to Build on a Solid Foundation
↑

Aquantia AQC-111C 5G Ethernet

Accelerated, built-in networking

Prime X299-A II has 5Gbps Ethernet onboard to deliver up to 5X the bandwidth of standard gigabit Ethernet. You'll enjoy streaming uncompressed 4K UHD videos without stutter, and backups and file transfers that are faster than ever before. There's also support for intermediate connections, so it's easy to choose your ideal bandwidth and benefit from ultra-low latency at any speed up to 5Gbps.

* Actual speed varies, and depends on networking conditions.

Small Details Make a Big Difference

Prime H570 series adds the nuanced details that improve every experience, from exclusive codecs that provide pristine audio quality to intuitive RGB lighting controls that let you customize your system to create a uniquely personal look.

SafeSlot Core+

SafeSlot Core+ is the ASUS-exclusive PCIe slot fortified with a one-piece stainless-steel brace that shields the slot to protect it from damage. The metal cover is tightly secured to the slot with hooks, and the entire assembly is firmly anchored to the PCB with strengthened solder points to provide a secure foundation for heavyweight graphics cards.

Strengthened solder points around the PCIe and DIMM pins.
Metal inserts keep graphics cards properly aligned during installation.
The metal side-panels feature hooks that firmly clasp the slot body.

LANGuard

Pumped-up throughput 2.5X higher surge tolerance

ASUS LANGuard is a hardware-level network protection feature that integrates advanced signal-coupling technology and premium anti-EMI surface-mounted capacitors to improve throughput and ensure a more reliable connection.

Overvoltage Protection

World-class circuit-protecting power design

An exclusive circuit design with built-in voltage regulators to protect your motherboard from damage caused by unexpected high-level voltages from unstable or inferior power supplies.

DRAM Overcurrent Protection

Short-circuit damage prevention

Onboard resettable fuses prevent overcurrent and short-circuit damage. This extends beyond I/O ports to DRAM to safeguard the lifespan of your system and connected devices.

Stainless-Steel Back I/O

3X corrosion-resistance for greater durability

Corrosion-resistant stainless-steel back I/O panels bonded with chromium oxide have a lifespan that's three times longer than ordinary panels.

Learn more

1000+

Compatible devices and components

The Prime H570 series provides superior compatibility with thousands of components and our Qualified Vendor List (QVL) identifies memory compatibility, giving you more choices for worry-free PC-building experiences.

8000+

Validation hours

Every ASUS motherboard is subjected to more than 8,000 hours of stringent tests, including burn-in, environmental, compatibility, software and safety tests to confirm their durability. ASUS reliability surpasses industry standards, ensuring that every component is designed to function flawlessly in any environment.

Temperature and humidity tests

Ensures components withstand extreme conditions.

Thermal measurement tests

Ensures that the system remains cool and stable under the heaviest loads.

Insertion tests

Every port and connector is put through repeated installation cycles.

Aging tests

Up to 48-hour aging test ensures reliability.

Power-consumption tests

Checked for world-class energy efficiency.

Temperature and DC margin tests

Ensures that the motherboard is capable of coping with voltages fluctuations caused by varying temperatures.

Thermal-shock tests

Ensures ability to survive temperature changes during transportation.

Non-operation shock tests

Built to withstand jolts that may occur during shipping.

Burn-in tests

Every component is checked to ensure flawless operation.

Installation tests

Connector placement is double-checked to ensure hassle-free installation.

Drop tests

Drop tests from various heights ensure durability.

Salt and spray tests

Tested for I/O reliability, prolonged lifespan and rust-resistance.

Back to Little Things Make a Big Difference
↑

Outstanding Audio

Combined onboard features deliver elevated audio

Intelligent design and premium hardware create audio quality unlike anything you've ever experienced.

Audio Shielding

Separates analog/digital signal domains, significantly reducing multi-lateral interference.

Separate Layer for Left and Right Tracks

Ensures minimal crosstalk between audio paths.

Premium Japanese Capacitors

Premium parts provide an immersive sound signature, with exceptional fidelity.

Flawless Audio that Immerses You in the Game

Power Pre-Regulator

Reduces power-input noise to ensure consistent performance.

Audio Shielding

Separates analog/digital signal domains, significantly reducing multi-lateral interference.

Separate Layer for Left and Right Tracks

Ensures minimal crosstalk between audio paths.

Integrated Amplifier

Capable of driving high-impedance headphones, without rolling-off high or low frequencies.

De-Pop Circuit

Reduces start-up popping noise to all audio outputs.

Premium Japanese Capacitors

Premium parts provide an immersive sound signature, with exceptional fidelity.

Back to Little Things Make a Big Difference
↑

Aura Sync

Outshine the Competition

A well-tuned enthusiast system deserves a matching aesthetic. ASUS Aura offers full RGB lighting control with a variety of functional presets for the strips connected to the onboard RGB headers — and it can all be synced with an ever-growing portfolio of Aura-capable hardware.

Learn more >

Static
Breathing
Strobing
Rainbow
Color Cycle
Starry Night
Music Effect
Smart

Addressable Gen 2 RGB Header

Two addressable Gen 2 RGB headers are capable of detecting the number of LEDs on second-gen addressable RGB devices, allowing the software to automatically tailor lighting effects to specific devices. The new headers also offer backward-compatibility with existing Aura RGB gear.

Armoury Crate

Armoury Crate is a new software utility designed to give you centralized control of supported products. From a single intuitive interface, Armoury Crate allows you to easily customize RGB lighting and effects for every compatible device in your arsenal. The software also provides control of settings for an ever-growing number of ASUS products, including keyboard and mouse preferences. Armoury Crate even features dedicated product registration and news to help you stay in touch with the ASUS community.