[Motherboard][ROG MAXIMUS Z690 EXTREM] Attentions for OLED cable when installing M.2_1 heatsink | Official Support

ASUS Support FAQ

FAQ

Product ROG MAXIMUS Z690 EXTREME

[Motherboard][ROG MAXIMUS Z690 EXTREM] Attentions for OLED cable when installing M.2_1 heatsink

When installing the M.2_1 heatsink, please be careful not to bend or rotate the OLED cable. When installing, please hide the cable in the green frame in the figure below, and do not hide it under the heatsink in the red frame, so as to avoid the unstable signal of the cable and causing the OLED has display issue.

The figure below shows the incorrect way of hiding cable:

Was this information helpful?

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ