BIOS & Firmware
- Treiber & Tools
- BIOS & Firmware
Notice: Before NAS-M25 upgrades the newest firmware, please remove all Add-in modules in Configuration center -> Maintenance -> Software Add-ins.
1. Release U-Boot to support USB flash disk boot up.
2. Support Hynix DDR based on 1.0.1.3
3. Firmware can't downgrade
1. Add Fan control webpage for user specified mode
2. Release U-Boot v1.7 to modify NAND access parameter
Please note: please enter Configuration center -> Maintenance -> Software Add-ins and remove all Add-in module before you upgrade the firmware.
Fixed bug:
1. Released TwonkyServer 6.0.31
2. Released apkg_File_Manager_1.05[20110330] to fix ASUS login issue
3. Release apkg_File_Download_1.04[20110321] to fix ASUS naming issue
4. Supported 3TB HDD
Please note: If your firmware version is 1.0.0.7, please enter Configuration center >> Software Add-ins and remove all Add-in module before you upgrade the firmware from 1.0.0.7 to 1.0.0.9.
Fixed bug:
01. [Power management] HDD cannot enter spin down mode when install APKG
02. [status >> logs] no UPS power is lower log in the log
03. [samba] user -admin cannot access by samba protocol - when password was blank
04. [user/group] cannot set normal user -admin password blank ( expect can set success)
05. [e-mail alert] the mail information character had some incorrect - System temperature has exceeded
06. [samba][RAID] samba daemon was not in process list - special process
07. [network share][USB storage] USB storage network share did not remove after umount USB storage
08. [Disk >> Disk status] display the file system type
09. [Maintenance >> password] change web page timeout value to 2 minutes
10. [samba] smb can't connect when the DUT reformated
