OC Panel
Overclocking command center
Get your hands on real-time system monitoring and tweaking in two modes. Normal Mode has OC Panel inside the case, while in Extreme Mode it works as an external console. For both, its clear 2.6” display keeps you fully informed and in control of maximum available power.
OC Panel Normal Mode
Easy system monitoring and boosting
Install OC Panel in your PC case easily, as it fits any 5.25” drive bay. When used this way, it operates in Normal Mode, perfect for hardcore gaming and standard overclocking. It shows dynamic CPU temps, ratios, base clocks, and fan RPM info. You can also use one-click instant CPU Level Up, which has two speed boost presets. For cooling, select Turbo, Standard, and Silent CPU fan modes as needed.
OC Panel Extreme Mode
Overclocking made this easy
OC Panel can be used as an external overclocking console, integrating many overclocker-appreciated hardcore features. These include Subzero Sense, VGA SMB, VGA Hotwire, four 4-pin fan headers, Slow Mode, Pause Switch, and multiple parameter tuning. All settings adjustable real-time and quickly applied through easy-reach control buttons.
Integrated Subzero Sense and VGA Hotwire give you super-cool liquid thermal temp readings and field access to streamlined hardware-level GPU overvolting right on the 2.6” display. Easily read current values and set targets on-the-fly, so power comes easy!
* Extreme Mode capabilities, including V1, V2, DRAM and other voltage definitions, vary by chipset. Please refer to your motherboard manual for details.
OC Panel easy setup
Works in just a few steps
In both Normal and Extreme Modes, OC Panel is super-easy to install. Start enjoying its amazing capabilities with a few simple steps.
Compatible Models
| Chipset | Motherboard Model | Full Function | Partial Function | Remark |
| Intel Z87 |
Maximus VI Extreme
|
V
|
*V1=Vccin; V2=Vcache; | |
| Intel Z87 |
Maximus VI Formula
|
V
|
*V1=Vccin; V2=Vcache | |
| Intel Z87 |
Maximus VI Gene
|
V
|
*V1=Vccin; V2=Vcache | |
| Intel Z87 |
Maximus VI Hero
|
V |
V2, Vcore tuning, LN2 mode,
Slow Mode are not supported. |
|
| Intel Z87 |
Maximus VI Impact
|
V
|
*V1=Vccin; V2=Vcache | |
| Intel X79 | Rampage IV Black Edition |
V
|
*V1=VTT_CPU; V2=DRAM_AB; DRAM=DRAM_CD | |
| Intel Z97 | Maximus VII Formula | V | *Firmware 0402 or later required **V1=Vccin; V2=Vcache |
|
| Intel Z97 | Maximus VII Gene | V | *Firmware 0402 or later required **V1=Vccin; V2=Vcache |
|
| Intel Z97 | Maximus VII Hero | V | *Firmware 0402 or later required **V1=Vccin; V2=Vcache ***Supports Normal Mode and DRAM, BCLK, Ratio, VGA Hotwire on Extreme Mode |
|
| Intel Z97 | Maximus VII Impact | V | *Firmware 0402 or later required **V1=Vccin; V2=Vcache |
|
| Intel Z97 | Maximus VII Ranger | V | *Firmware 0402 or later required **V1=Vccin; V2=Vcache ***Supports Normal Mode and BCLK, Ratio, VGA Hotwire on Extreme Mode |
|
| Intel X99 | Rampage V Extreme | V | *Firmware 0501 or later required **V1=Vccin; V2=DRAM_AB; DRAM=DRAM_CD |
|
