Assistance technique pour
ProArt Display PA278QV Trouver un autre modèle
En enregistrant votre appareil, vous pouvez facilement en gérer la garantie, obtenir une assistance technique et suivre l'état des réparations.
Enregistrer mon produit

    Garantie

    LCD Monitors Warranty Policy

    Casing

    Panel

    Parts and Accessories (optional)

    3 Years

    3 Years

    1 Year (cables and bundled gifts are excluded from the warranty)





    Dead on Arrival (DOA)


    If LCD Monitor is found to be defective in the first 7 days of purchase, please bring your invoice or receipt (with all cartons and accessories) for a new replacement of the same model.

    7 days replacement condition:

    1. Abnormal line/Incorrect Color/Overlapping images (Always set the PC display to the native resolution of the monitor and perform Auto Adjustment by pressing [S] hotkey for 3-5 seconds if it's the first time you connect the monitor with your PC)
    2. Dead pixel on the panel (please refer to the Brighter/Darker Spot Acceptance Chart below)
    3. Unable to switch on the monitor by Power button/White Display/Power LED does not light up
    4. Control buttons not working
    5. Power leak and safety concerns
    6. Shipment arrived with carton box damaged
    7. Model name does not match with shipment (Please check with your reseller first)

    * Warranty term and DOA policy may vary in different territories.


    This Limited Warranty does not Apply to: (“Excluded Circumstances”)


    1. Removed, revised, defaced, or damaged warranty seals and/or original factory serial numbers.
    2. Damage resulting from improper installation, including, but not limited to, incorrect or insufficient electric power supply.
    3. Defects resulting from long-term improper use.
    4. Damage resulting from long-term static images displayed (also referred as “Image Sticking”) or improper use.
    5. Damage (including cosmetic damage such as scratches, spots, or dents), failure, loss, or personal injury due to misuse, abuse, negligence, improper maintenance and storage, or acts of nature.
    6. Damage incurred while being transported or moved by the customer.
    7. Damage resulting from infection or installation of illegal software.


    Warranty Exclusions


    The customer will incur the cost of the repair for any of the following:

    1. Damaged parts or components not sold or manufactured by ASUSTek.
    2. Parts repaired or replaced by parties other than ASUSTek Authorized Service Centers.
    3. Units purchased outside the service coverage regions; .
    4. Excluded Circumstances.


    LCD Panel Bright/Dark Dot Warranty & Regulation


    Since LCD panel is made up of millions of micro electronic pixels, if one pixel no longer functions normally, it will become a bright or dark dot. By ISO 13406-2 standards, ASUS conforms to the acceptance level between 3 to 5 defective bright/dark pixels. In order to deliver ultimate vision experience to ASUS customer, if your panel is less than or equal to the above number of dots, then, it is considered as an acceptable LCD monitor.In addition, the Premium Range of ASUS LCDs offers a unique Zero Bright Dot (ZBD) warranty.Please refer to ASUS LCD Monitor Bright/Dark Dot Warranty Table below.

    TAKING CARE OF YOUR LCD:

    1. Turn off the LCD if you will not use it for a long time. Doing this will help you save electric power consumption and prolong your LCD's life.
    2. Do not touch the LCD with your fingers, sharp, and/or hard object so as not to scratch the LCD.
    3. Use monitor-cleaning sheet to lightly wipe off dirt from the LCD. Do not use your fingers!
    4. Do not use any chemicals or detergents to clean the LCD.
    5. Use screen saver to avoid the damage caused by long-term static (non-moving) images displayed.


    ASUS LCD Monitor Bright/Dark Dot Warranty Table:


    Applied Models: PA Series

    After Purchase

    Bright Dot

    Dark Dot

    36 months

    0

    ≦5


    1. A Pixel consists of sub-pixels: one red, one green and one blue dot. A bright dot is a sub-pixel that is always on under Black pattern. A dark dot is a sub-pixel that is always off under any pattern.
    2. Micro Dot, less than or equal to 1/2 dot (50μmφ), is excluded in the warranty
    3. Non-ZBD/ZBD warranty models may vary from different regions.


    ASUSTeK Australia and New Zealand LCD Monitor Warranty Policy



     
    Product has High-Definition Multimedia Interface.
    • Les produits certifiés par la Commission fédérale des communications et de l\^dIndustrie du Canada seront distribués aux États-Unis et au Canada. Veuillez visiter sites Web ASUS des États-Unis et du Canada pour obtenir des informations sur les produits disponibles localement.
    • Toutes les spécifications sont sujettes à changement sans notification préalable. Consultez votre revendeur pour connaitre les spécifications exactes des offres. Les produits peuvent ne pas être disponibles dans tous les marchés.
    • Les spécifications et les caractéristiques peuvent varier selon le modèle, et toutes les images sont des exemples. Veuillez consulter les pages de spécification pour obtenir les détails complets.
    • La couleur de la carte et les versions des logiciels sont sujettes à modification sans préavis.
    • Tous les noms de marques de commerce, de marques et de produits sont la propriété de leurs sociétés respectives.
    • Les termes HDMI, interface multimédia haute définition HDMI et habillage commercial HDMI, et les logos HDMI sont des marques commerciales et des marques déposées de HDMI Licensing Administrator, Inc. 
      • The actual      transfer speed of USB 3.0, 3.1, 3.2, and/or Type-C will vary depending on many      factors including the processing speed of the host device, file attributes and      other factors related to system configuration and your operating environment.