Firmware Change:
Release BIOS 0601 for EeePC X101H
1. Update EC firmware to EPCG-021.

1. Fix CPU ratio can't be constrained in power saving mode on N570 CPUs.
2. Correct CPU count number in BIOS setup menu.

1. Modify CPU Fan policy for supporting Atom N570 CPU.
2. Support Realtek audio EQ.
3. Fixed setup token.

1. Enable L1 supported for WLAN device(NB-047, NE785H).
2. Deep S3 auto wake up when remaining capacity less than or equal to 5%.
3. Don't power on if battery remaining capacity less than or equal to 1%.
4. Adjust USB port for Camera module.
5. Update EC firmware to EPCG-009.
(In Deep S3, If the battery remaining capacity becomes lower than Battery_Low_RSOC
setting in ECConfig, EC will wakeup the system. Furthur more, EC will set a flag
to notify AP to go to S4.)
(In S4/S5 state, if the battery remaining capacity is lower than the Battery_Critical_RSOC
setting in ECConfig, EC will prevent system from going to S0.)

1. Modify CPU fan policy by thermal team request.[thermal]
2. Disable both LPC prefetch and power-latch.
3. Update Verb table for supporting mono (speaker) output.[E.E.]
4. Update EC firmware to EPCG-008.
(Fixed the bug that system cannot resume from S4 after "Hybrid S4" in AC mode.)
(LED behavior in Deep S3 is now the same as it is in normal S3.)
(If the battery remaining capacity becomes lower than 10% in Deep S3, EC will wake up the system.)
5. Disable SLP_S4 Assertion Stretch for improving wake up time from Deep S3.
6. Disable USB Charge supported.
7. Remove deep S3 related setup items.