[ Projector ]The projected image looks like trapezoid or tilted to one side. | Official Support

ASUS Support FAQ

FAQ

[ Projector ]The projected image looks like trapezoid or tilted to one side.

Please follow below steps to check:

1) Press the button “Keystone” to correct distorted images resulting from an angled projection.

2) Reset the projector device for default setting and try again. How to reset the unit to default setting

Note: Each model of Projector may have different UI arrangement.

If the error issue still exits after default setting , please contact your local technique support center or service center for help. https://www.asus.com/support/CallUs

Was this information helpful?

Yes No

Contact Support

If you need more help, see our solutions to get support.

The above information may be partly or entirely quoted from external websites or sources. Please refer to the information based on the source that we have noted. Please directly contact or inquire via the sources provided if there is any further question. Please note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could differ depending on software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ