[Projector]The device is powered on but the projected color or display is abnormal, what should I do? | Official Support

ASUS Support FAQ

FAQ

[Projector]The device is powered on but the projected color or display is abnormal, what should I do?

Basically, ASUS projector will have auto-adjust to get the best performance but if your projected color is abnormal with flickering,shows grids or display screen is not full and complete and so on, please follow below steps to check:

1) Make sure the lens is clean with no dust and check again.

2) Make sure the cables are well connected to both device and socket.

3) Reset the unit to default setting and try again.
How to reset the unit to default setting

4) If the issue still exits after conducting default setting, please inquire and contact your local technique support center or service center for help from below link.
https://www.asus.com/support/CallUs

Was this information helpful?

Yes No

Contact Support

If you need more help, see our solutions to get support.

The above information may be partly or entirely quoted from external websites or sources. Please refer to the information based on the source that we have noted. Please directly contact or inquire via the sources provided if there is any further question. Please note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could differ depending on software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ