ZenFone 5Z
x
Android Q Beta


We continually strive to grow stronger and better with you, the ZenFone Community. In collaboration with Google, we'd like to invite you to participate in the Android Q Beta program, and be one of the first to try out the amazing new features of Android Q. Your feedback matters, and it will prove invaluable as move towards the official release of Android Q. The Android Q Beta program is now available for ZenFone 5Z (ZS620KL). Follow the instructions below to get started!





Important notice

The official version of Android 10 is now available for your ZenFone 5Z! If you've participated in the Android Q Beta program and wish to upgrade to the official version, you'll first need to revert your phone back to Android P in order to receive either an automatic OTA (Over-the-Air Technology) update, or to update the phone via the UL (Update Launcher). Please refer to the "How to opt-out and revert back to Android P" section on this page for the detailed opt-out procedure.
We apologize for any inconvenience this may cause, and we thank you for your continued support of ASUS products.





About Android Q Beta

Android Q Beta


Android Q Beta gives you access to an early build of Android Q. Joining this program earns you a chance to experience Android Q ahead of its launch, test and share your feedback, or develop your apps to make it compatible with the official Android Q platform. Please note that Android Q Beta is not the final build, so some features might be missing or not working properly.
To learn more about Android Q Beta, please visit Android Q Beta developer site.

New features


When it launches, Android Q will be full of exciting new features. For now, here are some of the impressive new features that you'll enjoy with the Android Q Beta program:

  • Dark Theme: Android Q now has a system-wide Dark Theme. Activate Dark Theme in Settings, or by turning on Battery Saver.
  • Suggested actions in notifications: You can now take action on messages with suggested actions in notification.
  • Prioritized notifications: You can decide whether an app's notifications are interruptive or gentle. Interruptive notifications will make noise, vibrate, and appear on your lock screen, whereas gentle ones will not. Android Q also introduces algorithms to automatically determine whether notifications should be interruptive.

Changelog


First version release: May 7th, 2019

Second version release: Android Q Beta 6

  • Release date: September 3rd, 2019
  • Security patch level: August 2019
  • Build number: QKQ1.190723.002.WW_user_100.03.7.34_20190830 release-keys
  • Supports gesture navigation.
  • Includes the final APIs, official API 29 SDK, final system behaviors, the latest system optimizations, and bug fixes.

List of known issues

  • SD cards are not supported.
  • The current Android Q Beta version does not support VoLTE.
  • You can find all the latest known issues and general advisories from Google on the Android Q Release Notes page.




Join Android Q Beta program

How to opt-in to Android Q Beta


Before installing a Beta firmware on your device, please note that:

  • The firmware is for ZenFone 5Z (ZS620KL) and is provided by ASUS.
  • Android Q Beta updates are sometimes not as stable as official ASUS firmware updates. By installing this update, you accept the potential risks.
  • Please be aware that installing the system image on a device removes all personal data from the device, so you should back up your data first.
  • Please note that this Android Q Beta version is stock Android. It does not include ZenUI or any ZenUI-related functions, such as ASUS PixelMaster Camera.
  • Please follow the instructions below to opt-in via Fastboot. Should you require any onsite help, please visit your nearest ASUS customer service center.



Windows:
Step 1: Please ensure battery level is higher than 20%. Hold down the Power and Volume Up buttons until the device reboots. Upon reboot, you'll see Fastboot Mode appear on the fourth line on the screen. Then connect your ZenFone 5Z to your PC via a USB cable.

Step 2: Decompress the Android Q's image file. Double click on “update_image.bat,” and it will start the flash image command. Do not unplug the USB cable and ensure a stable connection between your ZenFone 5Z and PC during the flashing process.

Step 3: When the flash finishes, a ‘Download Complete' message will appear on the terminal. Hit the Enter key on the keyboard to restart your ZenFone 5Z. If a ‘Update image failed' message appears on the terminal, the flash was unsuccessful. In this case, please try again or report the issue.

Ubuntu:
Step 1: Please ensure battery level is higher than 20%. Hold down the Power and Volume Up buttons until the device reboots. Upon reboot, you'll see Fastboot Mode appear on the fourth line on the screen. Then connect your ZenFone 5Z to your PC via a USB cable.

Step 2: Decompress the Android Q's image file. Open the terminal on the image's path, and run “update_image.sh” on the terminal to start the flash image command. Do not unplug the USB cable and ensure a stable connection between your ZenFone 5Z and PC during the flashing process.

Step 3: When the flash finishes, a ‘Download Complete' message will appear on the terminal. Hit the Enter key on the keyboard to restart your ZenFone 5Z. If a ‘Update image failed' message appears on the terminal, the flash was unsuccessful. In this case, please try again or report the issue.

Mac:
Step 1: Please ensure battery level is higher than 20%. Hold down the Power and Volume Up buttons until the device reboots. Upon reboot, you'll see Fastboot Mode appear on the fourth line on the screen. Then connect your ZenFone 5Z to your PC via a USB cable.

Step 2: Decompress the Android Q's image file. Open the terminal on the image's path, run “update_image_for_mac.sh” on terminal to start the flash image command. Do not unplug the USB cable and ensure a stable connection between your ZenFone 5Z and PC during the flashing process.

Step 3: When the flash finishes, a ‘Download Complete' message will appear on the terminal. Hit the Enter key on the keyboard to restart your ZenFone 5Z. If a ‘Update image failed' message appears on the terminal, the flash was unsuccessful. In this case, please try again or report the issue.

How to opt-out and revert back to Android P


Please follow the instructions below to opt-out via Fastboot. Should you require any onsite help, please visit your nearest ASUS customer service center.


Windows:
Step 1: Please ensure battery level is higher than 20%. Hold down the Power and Volume Up buttons until the device reboots. Upon reboot, you'll see Fastboot Mode appear on the fourth line on the screen. Then connect your ZenFone 5Z to your PC via a USB cable.

Step 2: Decompress the Android P's image file. Double click on “update_image.bat,” and it will start flash image command. Do not unplug the USB cable and ensure a stable connection between your ZenFone 5Z and PC during the flashing process.

Step 3: When the flash finishes, a ‘Download Complete' message will appear on the terminal. Hit the Enter key on the keyboard to reboot your ZenFone 5Z to Android P. If a ‘Update image failed' message appears on the terminal, the flash was unsuccessful. In this case, please try again or report the issue.

Ubuntu:
Step 1: Please ensure battery level is higher than 20%. Hold down the Power and Volume Up buttons until the device reboots. Upon reboot, you'll see Fastboot Mode appear on the fourth line on the screen. Then connect your ZenFone 5Z to your PC via a USB cable.

Step 2: Decompress the Android P's image file. Open the terminal on the image's path, and run “update_image.sh” on the terminal to start the flash image command. Do not unplug the USB cable and ensure a stable connection between your ZenFone 5Z and PC during the flashing process.

Step 3: When the flash finishes, a ‘Download Complete' message will appear on the terminal. Hit the Enter key on the keyboard to reboot your ZenFone 5Z to Android P. If a ‘Update image failed' message appears on the terminal, the flash was unsuccessful. In this case, please try again or report the issue.

Mac:
Step 1: Please ensure battery level is higher than 20%. Hold down the Power and Volume Up buttons until the device reboots. Upon reboot, you'll see Fastboot Mode appear on the fourth line on the screen. Then connect your ZenFone 5Z to your PC via a USB cable.

Step 2: Decompress the Android P's image file. Open the terminal on the image's path, and run “update_image_for_mac.sh” on the terminal to start the flash image command. Do not unplug the USB cable and ensure a stable connection between your ZenFone 5Z and PC during the flashing process.

Step 3: When the flash finishes, a ‘Download Complete' message will appear on the terminal. Hit the Enter key on the keyboard to reboot your ZenFone 5Z to Android P. If a ‘Update image failed' message appears on the terminal, the flash was unsuccessful. In this case, please try again or report the issue.


Terms of Service





Report issues or feedback

We always appreciate your feedback. Feel free to discuss or share your thoughts with the ZenTalk community. Should you encounter any issues or want to provide feedback on the Android Q Beta, please fill out the Google form.